Before a Life-Safety Visit: Tidying Cables, Closets and Power Strips

A surveyor or fire marshal does not need to understand your network to notice a power strip plugged into another power strip behind the nurses' station. They see it as a heat and overload risk, and they are right to. Technology clutter is easy to miss because it grows slowly, one added printer or one extra charger at a time.

The good news is that most of this is housekeeping, not engineering. A maintenance director and one other person can walk the building in an afternoon and fix the majority of it. This article covers what to look for, what to fix yourself and what to hand to IT.

Power strips and daisy chains

The classic finding is a daisy chain: one power strip or extension cord plugged into another to reach farther. It stacks the load of many devices onto a single outlet and cord that were never meant to carry it. Many inspectors flag it, and the rules about how power strips may be used vary by jurisdiction and by the code your facility is held to, so ask your fire marshal or life-safety consultant what applies to you.

Look for these in particular:

Strips plugged into strips, or extension cords used as permanent wiring.

Strips on the floor under desks where they collect dust, get kicked or sit near water and cleaning chemicals.

Strips covered by papers, blankets or cardboard boxes.

Cords running under rugs, through doorways or across walkways.

Space heaters, microwaves or coffee makers on the same strip as computers.

If a room does not have enough outlets, the fix is another outlet installed by a licensed electrician, not a longer chain of strips. Note which rooms keep coming up. Those are the ones to bring to your electrician.

Equipment closets and the room that became storage

Network closets and server rooms are often the first place a spare chair, a box of supplies or a floor buffer ends up. Walk to each one and check that:

You can open the door fully and reach the equipment without moving anything.

Nothing is stored against or on top of the equipment, and vents are clear.

The room is not warm. A closet that feels hot is a sign the equipment is struggling for air.

Nothing combustible, such as paper stock or cleaning supplies, is stacked inside.

The door locks, and the people who hold keys are still the right people.

Do not rearrange the cabling or unplug anything while you are in there. Moving a closet around is fine; touching the equipment is for IT. If something looks wrong, take a photo and send it.

Loose cabling and trip hazards

Look at the floors and ceilings. A network cable stretched across a hallway to a temporary workstation is a trip hazard for a resident with a walker and for a night aide carrying linens. Cables hanging out of ceiling tiles, cords draped over door frames and phone lines taped to the floor all tell the same story: someone needed a quick fix and it became permanent.

Check also for cords pinched in doors, cables run along exit routes and anything that crosses a path a wheelchair or stretcher needs. Where a device genuinely needs to be in that spot, ask IT whether a wall jack can be added or the device can be moved.

Labels, cords and old equipment

An inspector or a new technician should be able to tell what things are. Labels on closets, panels and major equipment save time, and so does a current list of who to call. Meanwhile, look for dead weight: old computers, monitors and printers stacked in corners or in the closet that nobody has touched in years. Retired equipment may still hold resident or employee data on its drives, so do not throw it out or give it away. Set it aside and ask IT to arrange proper disposal.

A simple pre-visit walk-through

Pick a date a couple of weeks before you expect a visit, and bring a phone for photos.

Walk every nurses' station, the business office, the kitchen office, the therapy gym and each equipment closet.

Note each problem by room, with a photo.

Fix what is yours: clear the closet, remove strips from under beds and carpets, tuck loose cords.

Send IT a list of anything involving network cabling, phones or computers.

Send your electrician a list of rooms that need more outlets.

Re-walk the same route a few days before the visit.

Then repeat the walk quarterly. A short routine beats a scramble.

How we can help

UnityCare IT can walk the building with your maintenance director and tidy network closets, label equipment and re-route cabling that has crept into walkways. We can also move devices, add wall jacks where they are needed and arrange secure removal of retired computers. For electrical work and code questions, we will point you to your electrician and your life-safety authority.

Related service

A helpdesk your staff can call or text when something stops working.

Related articles

Keep reading

Contact UnityCare Technologies

Call or text: 405-285-3845

New customers: start@unitycareit.com

Existing customers: support@unitycareit.com

Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas

Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support