A housekeeper finishes the nurses' station and sprays the computer keyboard directly with the same disinfectant she used on the counter. A week later, half the keys stick, and the "E" no longer works. The disinfectant did what it was supposed to do. It was just applied in a way the keyboard was never built for.
Shared computer equipment in a care facility should be cleaned, and often. It should also be cleaned correctly. The rules are short, and housekeeping and unit managers can learn them in five minutes.
Keyboards, mice, touchscreens and badge readers are touched by many hands across many shifts. In a building with vulnerable residents, they are worth including in your infection-control routine. Your facility's infection-control policy decides how often and with which products, so follow it first. The notes here are only about protecting the equipment while you do.
Switch it off, or put it in a safe state. For a touchscreen, turn it off or lock it, so wiping does not trigger taps. For a keyboard and mouse, you can unplug a wired one, or turn off a wireless one, so stray key presses do not cause trouble.
Unplug where practical. Disconnecting from power reduces risk, particularly when liquid is involved.
Never clean a device that is hot, damaged or has exposed wires. Tell IT instead.
Wash or sanitize your hands and use gloves if your policy requires.
Equipment makers publish cleaning guidance, and the best rule is to follow it. In general terms:
A lint-free or microfiber cloth, slightly damp with a cleaner suited to electronics, works for screens.
Pre-moistened disinfecting wipes are common in healthcare, but some contain ingredients that can harm certain screen coatings or plastics. Check the manufacturer's guidance for your screens, and ask your IT provider if you are unsure.
Do not use glass cleaners, bleach, or harsh solvents on screens unless the maker says it is safe.
Use compressed air or a soft brush to lift crumbs from a keyboard before wiping.
Many hospital-grade keyboards and mice are sealed and made to be disinfected. Ordinary office ones are not, so ask which you have.
Wring out the cloth or wipe so it is damp, not dripping.
Wipe in light, straight strokes. Do not press hard.
Clean the top of keys, the mouse buttons, the edges and the cable.
For screens, wipe from the top down, avoiding the seams around the frame where liquid can seep in.
Keep liquid away from ports, speaker holes and between the keys.
Drying time: Disinfectants work only if they stay wet on the surface for the contact time listed on the product label. Do not wipe it off early. After that, let the device air dry completely before turning it on or reconnecting it. Do not use a hair dryer or heat. If you are in a hurry, a second dry microfiber cloth, once the contact time is over, is fine.
Some mistakes come up again and again.
Spraying liquid directly onto a keyboard, screen or computer
Soaking a cloth and letting it drip into the keys
Using abrasive pads, paper towels or rough cloths that scratch screens
Using strong chemicals not approved for electronics
Wiping while the device is on and receiving touch input
Plugging a wet keyboard back in
Pouring or dunking a keyboard in a sink
If liquid does get inside a device, switch it off at once, unplug it, turn the keyboard upside down to drain, and call your IT provider. Do not try to power it up to see whether it works.
Decide which devices are in the cleaning round: keyboards, mice, touchscreens, scanners.
Post a one-page instruction at each station.
Tell housekeeping what to use, and what to avoid.
Give staff a spare keyboard and mouse to swap when one needs deeper cleaning.
Report sticky or damaged equipment promptly.
Review the routine whenever products change.
Also consider equipment designed for cleaning. If a keyboard or mouse is cleaned several times a day, consider replacing it with a sealed, washable model or adding a protective cover. Your IT provider can recommend options that suit your screens and cleaning products.
UnityCare IT can help you choose keyboards, mice and touchscreens that stand up to frequent disinfecting, and can check which cleaning products are safe for your equipment. We can also help replace damaged devices and write a one-page cleaning guide for your units. Our help desk is available when a device has gotten wet or stopped working.
A helpdesk your staff can call or text when something stops working.
Call or text: 405-285-3845
New customers: start@unitycareit.com
Existing customers: support@unitycareit.com
Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas
Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support