Contractor Sign-In During Renovations: Network Closet Ground Rules

On the first morning of a wing renovation, the crew pulls ceiling tiles over the hallway and finds a bundle of blue cables. One cable is in the way, so it gets moved. By lunch, a nurse reports that the nurse call panel is acting up and two phones in the business office have no dial tone. No one did it on purpose. The crew did not know what the cables were.

Construction and care do not mix easily. Walls come down, dust rises, and workers are in places normally closed to the public. The network wiring, which runs through ceilings, closets and walls, is one of the quietest casualties.

Plan before the first day

The best time to protect the wiring is at the pre-construction meeting. Invite the maintenance director, the administrator and your IT provider alongside the general contractor. Walk the work area together and mark what is there: network closets, patch panels, cable runs in the ceiling, wireless access points, cameras, nurse call devices and door controllers. Ask the contractor to confirm in writing that they will not move, cut or disconnect any of it without notice.

Ground rules for the crew

Put a short set of rules in the contract or a project memo, and review them at the kickoff:

Network closets, server rooms and phone rooms are off limits to the crew unless escorted by a named facility person.

Nobody unplugs, relocates or cuts low-voltage cables, including thin colored ones that look abandoned.

Access points, cameras and similar devices in the work area are removed or protected only by the facility's IT provider, or with their direction.

Equipment in closets is kept clear of dust, water and storage. No material is stacked in front of racks.

Ceiling work near cabling is done with care, and any damage is reported the same day.

The crew's personal devices do not connect to the facility network or Wi-Fi.

Photos are not taken of resident areas, screens or paperwork.

Post the rules at the job entrance and in the crew's break area.

Controlled sign-in and badges

Every worker who enters should sign in, and a short log kept at the project entrance helps you know who was in the building on any given day. Many facilities issue temporary badges or visible passes. Ask the general contractor for a list of crew and subcontractors, and for any background checks they have done, to the extent your policies and the law allow. Check with counsel or your insurer on what you may require. Collect passes at the end of each day or end of the project, and remove any access that was set up.

Protect the closet itself

Lock it, and keep a key log of who is given a key. If the construction route passes the closet, consider a temporary barrier or sign. Check that the door closes fully and that no one has propped it open for ventilation or to run a cable. If the project needs a new network drop or relocation of equipment, schedule it with your IT provider, who can do it in a way that keeps your systems running. Ask whether a camera can cover the closet door during the project.

Dust, water and power

Renovation creates risks that have nothing to do with hackers. Dust can clog equipment. A cut water line or fire sprinkler test can reach a closet. Power may be shut off for hours. Plan for outages by asking the contractor for notice before any shutoff, and decide ahead of time what runs on battery or generator power. Have your IT provider confirm that backups are current before work begins.

Contractor computers and Wi-Fi

Crews often want internet access for plans, drawings and email. Give them a separate guest or contractor Wi-Fi network with no access to internal systems, or have them use their own cellular hotspots. Do not share the staff Wi-Fi password.

Do a walkthrough at the end

After construction ends, walk the area with IT. Confirm every device is back and working, that cables are labeled and tidy, that the closet door is secure and that any temporary access is closed. Test phones, nurse call, Wi-Fi coverage and cameras in the new space. Keep a record of the walkthrough with the project file.

How we can help

UnityCare IT can walk a renovation area with you before work begins, label and protect wiring, relocate access points and network drops safely, and set up contractor Wi-Fi that is separate from your internal network. We can also be on call during the project for questions from the crew.

Related service

Wi-Fi, switching, firewalls and internet that hold up across a whole facility.

Related articles

Keep reading

Contact UnityCare Technologies

Call or text: 405-285-3845

New customers: start@unitycareit.com

Existing customers: support@unitycareit.com

Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas

Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support