Door Access During an IT Failure: Fail-Safe vs Fail-Secure Locks

The power drops at 11 p.m. and the building goes to generator. Staff discover that the door to the memory care unit is still locked, which is expected, and that the door to the medication room swung open, which is not. Nobody planned either behavior. It came from how the locks were installed years ago.

Electronic access control, with badges, keypads and magnetic locks, is part of IT in many facilities now. How those doors behave in a failure is a safety question and a security question. Administrators should know the answer for every controlled door.

Fail-safe and fail-secure

These two terms describe what a lock does when it loses power.

Fail-safe locks release when power is lost. The door unlocks. Magnetic locks are commonly this type, because they hold only while electricity flows.

Fail-secure locks stay locked when power is lost. The door stays closed, though people can often still leave by a mechanical means such as a lever or push bar, depending on the hardware.

Neither is better in general. The right choice depends on the door. A door that is part of an exit path usually has life-safety requirements about how people can leave. A door that protects medications, records or a secured memory care unit has security needs. Both can apply at once.

Why this matters in a care setting

Several situations come up repeatedly:

Memory care and secured units. You want residents safe and not wandering, but you also need them to be able to leave in a fire. Many facilities use delayed egress hardware tied to the fire alarm. Codes and local authorities set what is allowed.

Medication and supply rooms. If a power failure unlocks them, controlled substances may be exposed.

Business office and records rooms. An open door may expose paper charts and equipment.

Exterior doors. A door that unlocks during an outage can let in strangers. One that locks may trap people if exit hardware is wrong.

Fire and life-safety codes are enforced by your fire marshal and state authority, and they vary. This article is not a code interpretation, so confirm requirements with them and your fire protection contractor.

What to find out, door by door

Ask your access control vendor or installer to help you build a simple table. For each electronically controlled door, record:

What type of lock it uses.

Whether it fails safe or secure on power loss.

How a person exits from the inside, and whether that works without power.

What the door does when the fire alarm activates.

Whether it works when the network, server or controller fails, or whether each door keeps working on its own.

How long the battery backup lasts and who tests it.

Who has a mechanical key and where it is stored.

Keep the table in your emergency binder.

The controller and the network

Many systems have a central controller or software that stores who may open which door. If it fails or loses the network, doors may keep working with stored settings, or they may default to a locked or unlocked state, or stop accepting badges. This varies, and you should not guess. Ask: "If the server dies tonight, can a night aide still get through the door she needs?"

Also ask about the badge or keypad itself. Does a power or network loss prevent staff from entering a unit? Is there a manual override, and who holds it?

Test it

A scheduled test beats a surprise. With your vendor and maintenance director, and in coordination with your fire authority where required, test how doors respond to loss of power and to alarm activation. Do this at a time when it will not endanger residents, and plan staffing for it. Record the result and fix anything unexpected.

Remember to review access after staff changes. Badges for former employees should be removed promptly, and that is a task for the administrator and your IT provider together.

How we can help

UnityCare IT can help you document which doors depend on the network and controller, check the battery backup and network connection behind them, and coordinate with your access control and fire protection vendors. We cannot decide what code requires, but we can make sure the technology side is understood and tested.

Related service

Security monitoring, HIPAA safeguards, backups and staff training for healthcare and small businesses.

Related articles

Keep reading

Contact UnityCare Technologies

Call or text: 405-285-3845

New customers: start@unitycareit.com

Existing customers: support@unitycareit.com

Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas

Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support