How Many Network Jacks per Resident Room, Nurse Station and Office

The drawings come back from the architect, and the electrical plan has outlets in every corner. The network plan shows one jack per room. Two years after opening, someone wants a wall-mounted TV, a smart bed sensor, a door controller and a phone in a resident room, and there is one jack and no way to add more without opening the wall.

Cable in the wall is the cheapest time to be generous. Adding it afterward costs far more in labor, patching and disruption.

Think about devices, not just desks

Older buildings counted jacks by the number of computers. Today a care building connects far more than computers. Before you pick a number, list what could plug in:

Computers, printers and phones.

Wireless access points and the cameras.

Televisions or room media devices.

Nurse call stations, bed or fall sensors and door controls.

Medication carts, scanners and wall-mounted tablets.

Building systems such as thermostats, if your contractor wants them on the network.

Ask each vendor how many connections their equipment needs and whether it uses power over the cable. Then add room to grow.

Resident rooms

Many facilities put at least one jack in each resident room, and two or more is a common choice so that a TV or sensor does not displace something else. Consider locations on both sides of the bed, and near the television wall. If your nurse call or room systems need a connection by the door or in the bathroom, plan that too.

Look at where residents' families may bring a device, and where staff may use a wall tablet for charting at the bedside. A jack at a comfortable height for a tablet mount is less intrusive than a cord across the floor.

Keep access points in mind. They are generally best located in the ceiling of corridors or between rooms, not inside each room. Your wireless designer should decide those positions based on a survey of the plan.

Nurse stations and medication rooms

Nurse stations have the heaviest use. Count each workstation, printer, phone and label printer, and add a few extra for guests such as a surveyor or visiting therapist, who may need to sit at a spare desk. Plan jacks at several points along the counter, not just one cluster.

Medication rooms need connections for the cart dock, a computer, a printer and a camera if used. Think about locations that stay reachable when the cabinets are placed.

Offices, therapy and common areas

Business office and administrator's office: one or two per workstation, plus the printer, copier and a spare.

Therapy gym: jacks near the desk, on the walls for screens and on the ceiling for any access point.

Dining room and activity rooms: a connection for a TV or presentation screen, and an access point in the ceiling.

Front desk and lobby: a computer, phone, visitor kiosk and a camera.

Kitchen and laundry: often forgotten, yet they may need a computer, a printer or a sensor.

Ceilings and equipment spaces

A cable to each ceiling access point and camera should be planned during construction. Place the cable end where it will be easy to reach and labeled. Leave a service loop so the device can be moved.

Equipment rooms need attention too. Each wing should have a closet with room for racks, enough power, cooling and a locked door. Ask your designer about the maximum cable length allowed between a jack and its closet, which standards set, because a building spread out may need more than one closet.

Questions to ask your contractor

Is every cable run tested and labeled at both ends, with a record given to us?

Are the cables going into a patch panel in a proper closet?

Is there extra capacity in the pathways (conduit or trays) for later runs?

What cable type is installed, and does it suit the building's ceiling spaces?

Are the penetrations through fire-rated walls sealed after the work?

Plan, then add a margin

Count your needs, add a cushion for the things you cannot yet predict, and ask your IT provider to review the plan before the walls close. Check the final count against what is installed, because drawings and reality sometimes differ.

How we can help

UnityCare IT reviews cabling plans for new construction and renovations in care buildings, and helps decide jack counts room by room. We work on network and Wi-Fi design, coordinate with your cabling contractor and test the result. We can document the finished system so that your maintenance team knows where everything goes.

Related service

Wi-Fi, switching, firewalls and internet that hold up across a whole facility.

Related articles

Keep reading

Contact UnityCare Technologies

Call or text: 405-285-3845

New customers: start@unitycareit.com

Existing customers: support@unitycareit.com

Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas

Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support