The survey team arrives unannounced on a Tuesday morning. The administrator shows them to a conference room, which is also the room where the activity director keeps her craft supplies. The surveyors ask for the Wi-Fi password, and nobody knows it. One outlet works, the printer shows an error and the IT contact is on vacation.
You cannot predict the day, but you can prepare the room. A workroom that is ready in advance takes a few minutes to open, and it avoids small technology problems that distract staff when they are busy.
Pick a room that is private, close enough to your records but not inside the nurses' station, and large enough for several people and their bags. A conference room or a training room works well. Avoid rooms that people walk through, and rooms with resident information visible, such as whiteboards.
Decide in advance what the room will be used for during a survey, and keep that room clean and free of personal items. Make sure it has a door that closes, adequate lighting, a table that seats the team and chairs that are comfortable for long days. Include a spot for coats and a wastebasket.
What a team may ask for, and what they are entitled to, depends on the survey type and your state. Confirm your obligations with your administrator, your state association or your compliance lead. This article covers the technology side only.
A survey team will usually bring their own laptops and need to get online. They should not use the network your staff, EHR and medical devices use. A guest network is a separate Wi-Fi network that gives internet access only and cannot reach your internal systems.
Check these before you need them:
A guest network exists, is turned on and works in the workroom, not just in the lobby.
The network name and password are written on a card you can hand over.
The password is changed from time to time, and when it is, the card is updated.
Your IT provider has confirmed that the guest network is separate from the staff network.
Do not give out the password to your staff network, and do not connect a surveyor's device to it. If the team asks for something unusual, ask your IT provider to help.
The team may need copies of policies, schedules and records. Set up one printer in or next to the workroom, and test it with a page before the day arrives. Keep paper and toner on hand, and check that the printer is connected to the computer that you will use to print.
Decide who handles printing. In many buildings, it is easier to have a staff member print and bring documents to the room, instead of giving the survey team access to your computers or network. Anything printed that contains resident information should be handled under your policies, and pages should not be left on the printer. Use a printer that can hold a job until someone enters a code at the machine if you have one.
A scanner or copier next to the room helps, too. Check that it works and know how to clear a paper jam.
Count the outlets before the survey. Several laptops, phones and a printer can overload a single wall outlet or a cheap power strip. Provide two or three power strips with surge protection plugged into different outlets, and tape down cords that cross a walkway.
Other items that help:
A clock on the wall.
A phone or a printed list of internal extensions.
A whiteboard and markers.
A projector or monitor, if the team asks to review something on screen.
Choose one person on staff, such as the administrator's assistant or the business office manager, to handle requests from the team about technology. Tell the survey team the person's name and number. Also give that person the help desk number and permission to call your IT provider right away.
If the connection fails, the printer stops or a computer freezes, they can call the help desk at once rather than hunting down the administrator.
Once a quarter, someone walks through the room and checks:
Guest Wi-Fi works, and the card has the current password.
The printer prints, with paper and toner.
Outlets work, and power strips are present.
The phone list is current.
The technology contact has been named, and the help desk number is on the card.
Nothing confidential is visible in the room.
Write the date, and who checked it.
UnityCare IT can set up a separate guest network, make sure it reaches the workroom, install and test a printer, and write a one-page card with the connection details and help desk number. Our help desk is reachable after hours too, so a technology problem during a survey does not have to wait.
Wi-Fi, switching, firewalls and internet that hold up across a whole facility.
Call or text: 405-285-3845
New customers: start@unitycareit.com
Existing customers: support@unitycareit.com
Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas
Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support