The owner of two assisted living communities twenty miles apart wants the business office in one town to see the files and the accounting system located in the other. Someone suggests a "site-to-site VPN." It sounds like something that needs a computer science degree, and the proposal is full of acronyms.
The idea is simpler than the name. This article explains what a tunnel between buildings does and what it needs, so you can ask good questions and know what to check when it stops working.
A VPN, or virtual private network, is a protected connection that runs across the public internet. A site-to-site VPN joins two entire networks, so the computers and devices in one building can reach those in the other as if they were in the same place.
Think of it as a private, locked pipe laid through a public road. Information inside is scrambled, so people who can see the traffic along the way cannot read it. The firewall at each building does the work of creating and maintaining the connection. Staff do not log in to it, and they do not need to know it exists.
This is different from a VPN that one person starts on a laptop to connect to the office from home. That is a remote access VPN. A site-to-site tunnel is always on, between two firewalls.
Common uses in a multi-site organization include:
Reaching shared files and folders stored at the main office from another building.
Using one phone system across buildings, so extensions can dial each other.
Letting a central business office reach the billing or payroll system, where it is hosted at one location.
Allowing a central IT provider to manage equipment at every site.
Viewing security camera recorders at another site.
Reaching a server or a printer in another building.
Many systems are now hosted in the cloud, in which case a tunnel may be unnecessary. Ask whether your needs justify one, or whether a cloud service is simpler.
A tunnel is only as good as the two ends and the internet in between. Both buildings need:
A working firewall that supports the connection and is kept up to date.
A reliable internet connection at each site. If either goes down, the tunnel goes down.
A way to find each other. Often at least one side has a fixed public address. Some designs can work without it, but you should ask.
Matching settings on both firewalls, including the security keys they share. A mismatch after a change on one side is a common reason a tunnel drops.
Network addresses that do not overlap. If both buildings use the same internal numbering, they cannot talk to each other until one is changed, which is a surprise in many older sites.
Enough speed for the traffic you plan to send, especially in the upload direction.
A tunnel is not a substitute for planning. It adds delay, so a system that is hosted at the other site may feel slower. It depends on the internet, so downtime planning matters. If one site is compromised, a tunnel can give an attacker a path to the other, so the connection should only allow what is needed, not everything. Your IT provider should set rules about which systems can cross it.
It also does not replace backups.
What will each building use the tunnel for, specifically?
Which equipment at each end creates the tunnel, and who manages it?
What happens to work at each site if the tunnel is down?
What happens when either internet connection changes, including the public address?
Are the internal networks numbered so they do not overlap?
How will we know if the tunnel fails, and who is alerted?
Does the tunnel allow all traffic, or only the systems that need it?
What is the plan if we add a third site?
Staff will report that "the other building is not reachable." Check whether both sites are online. Check whether anything changed recently, such as a provider switch, a firewall update or a power loss. Then call your IT provider with the time it stopped and what is affected, and keep paper procedures ready for the systems that depend on it.
UnityCare IT designs and manages tunnels between facilities, checks the firewalls and internet at each end, and monitors the connection so we see a failure before your staff do. We also help decide whether a tunnel or a cloud service better fits your systems, and our help desk is available after hours.
Wi-Fi, switching, firewalls and internet that hold up across a whole facility.
Call or text: 405-285-3845
New customers: start@unitycareit.com
Existing customers: support@unitycareit.com
Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas
Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support