Staff ID Badge Printers: Ribbons, Card Stock and Photo Quality

The first day of a new hire class is a bad time to find out the badge printer is out of ribbon. Four people are waiting for a badge, one photo has a shadow across the face, and the card that comes out has a pale stripe through the name. Someone reprints it, and another card goes into the trash.

A badge printer is more particular than an office laser printer, but it is predictable. Most trouble comes from ribbons, card stock, cleaning and photos.

How a card printer works

Most badge printers are dye-sublimation printers. A ribbon holds panels of colored dye, and heat transfers the dye onto the plastic card one color at a time. A clear or resin panel may follow for the text and a protective layer. The card moves back and forth under a print head, so even a small problem shows up on the finished card.

Ribbons

The ribbon is the supply that most often causes trouble.

Buy the ribbon type made for your printer model, since they are not interchangeable

Check what panel set it covers, such as full color or single color, since a full-color ribbon is wasteful for a plain black badge

Load it according to the diagram, and make sure it is seated and the slack is taken up

Keep a spare on hand, because a ribbon often runs out without a warning

Store ribbons in a cool, clean place

When a ribbon is installed, the printer usually reads it and tells you how many cards remain. Use that number as a guide.

Card stock

Cards must suit the printer. Plastic blank cards are common, and they come in different thicknesses and finishes. Use the kind your printer's maker supports.

Some badges also include a magnetic stripe, a smart card chip or a proximity chip for door access. Those need the right card type and sometimes an encoder. If your badge opens doors, ask your door access provider which cards and formats it requires before you order a case of blanks.

Handle blanks by the edges, because fingerprints and dust on the surface cause spots and uneven color. Keep the feed tray closed and cards in their packaging until needed.

Cleaning cycles

Dust causes most of the smudges, specks and lines. Many printers use a cleaning card or roller that you run through on a schedule. The common routine looks like this:

Turn the printer on and open the cover as directed

Replace or run the cleaning roller or card, according to the manual

Wipe the print head only with the approved swab

Let it dry before printing

Record the date on a small label inside the cover

Do this whenever you replace a ribbon, and on a set schedule if you print many badges. Do not skip it when things look fine.

Consistent photos

The badge is only as good as the photo. Two minutes of setup makes every photo look alike.

Pick one spot with even light, such as a plain wall near a window or a lamp, so there are no shadows

Use the same distance and height for the camera each time

Ask the person to face the camera, remove a hat and keep the face centered

Use a plain background

Check the picture on screen before printing

Pick a standard crop and size in the badge software so that every face fills the frame in the same way. Many problems with "washed out" photos are actually the lighting and not the printer.

Common faults and quick fixes

A pale stripe or missing color. Often a dirty head or a wrinkled ribbon. Clean and reload.

Card jams. Check for a damaged card or the wrong thickness setting.

Print too far to one side. Check the template and card alignment setting.

Blurry text. Check the print resolution and use a clean source image.

Card curls. Heat and humidity can bend cards, so let them cool and store them flat.

Protect the information

Badges and the badge database hold staff names, photos and access levels. Keep blank cards in a locked drawer, and keep a count of what is used. Lost badges should be turned off in your door access system as soon as they are reported.

How we can help

UnityCare IT supports badge printers as part of the office computers they connect to, including drivers, software setup and connections to door access systems. We can also help you document your photo and cleaning routine so new HR staff get the same result each time.

Related service

A helpdesk your staff can call or text when something stops working.

Related articles

Keep reading

Contact UnityCare Technologies

Call or text: 405-285-3845

New customers: start@unitycareit.com

Existing customers: support@unitycareit.com

Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas

Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support