A daughter in another state joins the care plan meeting by video. The social worker, the MDS coordinator, a nurse and the resident sit around a conference table, and within two minutes the daughter says she can only see the ceiling and cannot hear anyone who is not near the laptop. The meeting continues, but she has been left out of it.
Most of this is fixable with three pieces of equipment placed well and a two-minute test before the meeting. This article describes a setup that works in a standard conference room or a quiet office.
The camera should be at about eye level and pointed so the remote person sees faces, not the tops of heads. A laptop flat on a table looks up at people's chins. Raise it on a stack of books or a stand, or mount a separate camera above the screen at the end of the table.
Place the camera at the same end as the screen. When the family member looks at the screen to see people, it should also look like they are looking at the room. If the camera is on the side wall, they will appear to be gazing off to the side, and the people at the table will not know where to look.
Think about the resident. A resident in a wheelchair at the table should be seen clearly, not blocked by a chair or a plant. Make sure there is no bright window directly behind the people at the table, because it turns faces into dark shapes. Close the blinds or turn the table so the light falls on faces.
The built-in microphone on a laptop picks up the person closest to it and the noise of the laptop fan, and almost nothing from the far end of the table. A table microphone or a conference speakerphone placed in the middle of the table hears everyone about equally.
Place it on a stable surface, away from paper shuffling, coffee cups and the edge of the table where elbows land. Keep it clear of the projector or computer fans.
Also test the speaker side. The family member's voice has to be loud enough for everyone, including someone who is hard of hearing, without turning the volume so high that it echoes back into the microphone. If you hear an echo, lower the speaker volume a bit and move the microphone farther from the speaker.
A screen that is fine at a desk is often too small from across a conference table. Show the shared documents, such as the care plan summary or the schedule, at a large size, and close extra windows so there is nothing private on screen that the family has not been asked to see.
Some points that help:
Use a screen big enough that the person farthest from it can read the text, or share the document directly to the family's device.
Increase the text size or zoom before the meeting, not during.
Show only what the family is meant to review. Close resident lists, email and other chart windows.
Put the remote participant's video where the whole table can see it, not on a small corner of a laptop.
Check your facility's policy on what may be shared by video, and who may be present, since resident information is involved. Confirm any consent questions with your administrator or compliance lead.
Do this ten minutes before the family joins:
Join the call from the room's device, not from your own phone.
Ask a colleague in the hallway or on another line whether they can hear and see you clearly.
Speak from the far end of the table and check that the microphone picks you up.
Confirm the screen shows what you plan to share, and nothing you do not.
Check that the door is closed, the sign on the door says a meeting is in progress, and a phone or tablet is available if the connection fails.
Send the family member the link ahead of time, along with a phone number to dial in if the video does not work. Many family members are not comfortable with video, so offering a phone option avoids a lot of stress.
Write down the steps and post them in the room: how to turn on the screen, which input to choose, where the microphone is and who to call. Label the cables. The next staff member will not remember this, and a meeting should not depend on a single person who knows the trick.
UnityCare IT can help you set up a conference room for care plan meetings, including choosing a camera, a table microphone and a screen, and writing a one-page instruction sheet for staff. We can test the setup on site, and our help desk can step in if a call is not working when a family is waiting.
A helpdesk your staff can call or text when something stops working.
Call or text: 405-285-3845
New customers: start@unitycareit.com
Existing customers: support@unitycareit.com
Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas
Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support