Screen Height, Glare and Posture at Charting Stations

By the end of a twelve-hour shift, a nurse at the hallway charting station has her chin pushed forward and her shoulders up around her ears. The monitor sits too low, the overhead light bounces off the screen and the keyboard is at a height set for a different person. Nobody planned it that way. It was set up once and never changed.

Charting is a large part of a care shift, and small changes at the station can make it more comfortable. This is general comfort guidance, not medical advice. If you or a staff member has pain, numbness or ongoing symptoms, talk to your supervisor and your occupational health contact or a health professional.

Start with the monitor

The monitor is the biggest factor in neck strain. A few rules of thumb:

Put the top of the screen at or slightly below eye level when you are looking straight ahead.

Keep it about an arm's length away, a little closer for small text.

Tilt it slightly back so that you look slightly down at the center.

Place it directly in front of you, not off to one side, if it is your main screen.

If the screen is too low, raise it with a monitor stand or a stack of sturdy, stable items made for the purpose, not loose books or boxes. If you cannot move it, tell IT or maintenance. Many monitors have height-adjustable stands, and an arm mount can be added.

Deal with glare

Glare makes you squint, lean and strain your eyes. Look for the source.

Stand at the station and see where light reflects on the screen, from overhead lights, windows or a hallway.

Tilt or turn the monitor, or move it, so the reflection is not in your eyes.

Close blinds or curtains when sun hits the screen at certain hours.

Lower the screen's brightness if it is much brighter than the room, or raise it if the room is bright.

Ask maintenance if a light can be shielded or the bulbs changed, rather than putting tape over the light yourself.

Do not stick paper or notes on the screen. Ask IT whether a matte screen filter is appropriate, because some filters make text harder to read.

Seated and standing stations

At a seated station, the chair matters as much as the screen.

Feet should rest on the floor or a footrest, with knees roughly level with the hips.

Adjust the chair so the forearms are about level with the keyboard, with elbows near the body.

Support the lower back, and avoid perching on the edge of the seat.

At a standing station, the main issues are height and standing time.

Set the keyboard height so that elbows rest comfortably, wrists are straight and shoulders are relaxed.

Raise the monitor to eye level for the person using it. Shared stations may need a quick adjustment between users.

Stand with weight shifting from one foot to the other, and consider an anti-fatigue mat where floors are hard, if your safety policy allows.

Keyboard and mouse

Keep the keyboard and mouse close enough that you do not reach, and at the same height. Keep wrists straight, not bent up or down. Do not rest your wrists on the sharp edge of a desk. If a station is used by people of different heights, a keyboard tray or an adjustable surface helps. Ask about a wireless or compact keyboard if the desk is small.

Make it a habit

A quick routine can help any shift:

Take a minute at the start of your shift to adjust the chair, screen and keyboard for yourself.

Look away from the screen every so often, at something far away.

Shift positions, stand, stretch and walk when your tasks allow.

Report stations that cannot be adjusted, and note which ones come up again and again.

Unit managers can keep a short list of station problems, such as screens that are too low or lights that glare, and bring it to maintenance and IT.

How we can help

UnityCare IT can adjust or replace monitors, mount them on adjustable arms and move workstations to better positions. We can also tell you what equipment suits a station, such as a different keyboard or a second small screen. For anything related to injury, comfort or workplace safety, please involve your safety contact or a health professional.

Related service

A helpdesk your staff can call or text when something stops working.

Related articles

Keep reading

Contact UnityCare Technologies

Call or text: 405-285-3845

New customers: start@unitycareit.com

Existing customers: support@unitycareit.com

Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas

Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support