The sky goes orange in the afternoon, the air in the hallway smells like a campfire, and the fire department says the wind is shifting toward your side of town. The administrator has maybe an hour to decide what happens next. Nobody wants to be figuring out where the backup drive is at that moment.
Smoke and ash are a quiet threat to computers, and a grass fire is a loud one. Both are worth planning for in small facilities, especially those on the edge of town with open fields nearby. This article covers what smoke does to equipment and what to prepare so a fast departure goes smoothly.
Fine ash is abrasive and can be slightly conductive. Fans pull it into servers, switches, desktop PCs and the power supplies behind the nurses' station. Over days it can clog vents, coat circuit boards and cause overheating. Smoke residue can also corrode contacts and connectors over time, which sometimes shows up weeks later as flaky ports or random reboots.
The risk is highest where the building brings in outside air: rooftop air handlers, open doors, propped windows and cheap window units. Equipment in a closed interior room with filtered air fares better than a PC sitting near the front door.
When air quality is poor, a few small habits help:
Keep exterior doors closed and avoid propping them for deliveries.
Ask your maintenance director to check HVAC filters and, where the system allows, set it to recirculate rather than pull in outside air. Confirm with your HVAC contractor what is safe for your system.
Keep equipment rooms and closets closed, and keep portable fans from blowing outside air across computers.
Do not run a vacuum or compressed air on ash-covered gear. That pushes ash deeper or spreads it.
If ash does settle on equipment, power it down gently and have a professional assess it before restarting. A quick wipe of the outside with a slightly damp, lint-free cloth on a powered-off device is fine. Opening a server to clean it is a job for your IT provider.
A grass fire can move fast, and the first priority is always residents and staff. The technology list comes second, which is exactly why it must be short and written down. Most of what you need is not a box in the server closet. It is access to information.
A reasonable grab list:
The laptop or tablet that can reach your EHR or resident census, plus its charger.
A current printed census, medication lists and emergency contacts, as your evacuation plan describes.
Mobile hotspots or a cellular device, charged.
The administrator's and business office's key credentials, kept in a secure form such as a password manager that works from a phone.
A recent backup drive, if you keep one, stored and transported securely because it contains protected health information.
Your fire and emergency plans and your state requirements drive what actually travels with residents, so treat this list as an IT addition to those, not a replacement.
If your EHR, email and files are hosted in the cloud, a fire at the building does not destroy your records. Staff can log in from the receiving location. That is the best protection you can have, and it is worth confirming before fire season rather than assuming.
If you have an on-site server, ask your IT provider two direct questions. Is there a recent backup copy somewhere off the property? Has anyone ever restored from it successfully? A backup in the same closet as the server is not protection against a building fire.
Technology planning fails if nobody knows who is responsible. Write down who shuts down the server if time allows, who grabs the grab list, and who calls the IT provider and the phone company. Include after-hours numbers. Keep a printed copy, because a fire may take the network and the intranet with it.
Also decide how you will tell families and staff where residents have gone. That usually depends on phone forwarding and a staff call tree, both of which work much better when set up before an emergency.
Once you can return, do not simply flip everything back on. Look for ash on vents, a burnt smell near equipment, and warm or noisy devices. Have your IT provider confirm backups ran and that the network, phones, cameras and nurse call all report normally. Document any damage with photos for your insurer.
UnityCare IT can help you identify where your critical data lives, confirm that backups are stored off the property and tested, and build a short evacuation technology checklist that fits your emergency plan. We can also inspect equipment after smoke exposure and get systems back online, on site across Oklahoma, Texas and Kansas.
Security monitoring, HIPAA safeguards, backups and staff training for healthcare and small businesses.
Call or text: 405-285-3845
New customers: start@unitycareit.com
Existing customers: support@unitycareit.com
Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas
Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support