At 7:55 a.m. the first patient reaches the front desk of a small clinic and is handed a check-in tablet. The screen still shows the previous patient's half-finished form from last Friday. The tablet is at eleven percent and the stand is loose on the counter.
Check-in tablets are small, but they sit in the middle of a busy front desk and collect patient information all day. A simple daily routine keeps them working, clean and private. Here is how an office manager can set one up.
A tablet that lies loose on a counter gets dropped, taken or pushed around. A good stand does three jobs.
Holds the tablet at a comfortable angle so patients can read and tap without picking it up
Locks or secures it so it cannot be walked out the door, with a key or tool that only staff have
Lets the cable through so charging does not require removing the tablet
Place the stand where staff can see it, and where the screen faces away from the waiting room chairs so other patients cannot read it over a shoulder. Avoid sunlight directly on the screen and keep it away from sinks and drink machines.
Tablets in constant use run down fast. Plug the stand cable into a power source and leave it plugged in all day, so the battery stays full. Use the charger that came with the device or one approved by your IT provider, since cheap cables can fail or overheat.
Tuck the cable so it is not a tripping hazard, and check it for fraying every so often. At close of day, confirm that the tablet is on charge overnight. If your clinic has a spare tablet, keep it charged and ready.
Shared screens carry germs, so wipe between patients. Using the wrong product can damage the device, so first read your tablet maker's cleaning guidance, which will list suitable wipes or cleaners. In general:
Put the screen to sleep or power it down, so the wipe does not trigger taps.
Use a soft, lint-free cloth or a wipe approved for electronics. Dampen it, do not soak it.
Wipe gently, in one direction, including the edges and the stand.
Do not spray liquid onto the tablet, and keep moisture away from ports and the speaker.
Let it dry fully before waking the screen.
Avoid harsh chemicals, abrasive pads and heavy pressure. Your clinic's infection-control guidance sets the standard for how often and with what, so follow it, and ask your IT provider or the tablet maker if a product is safe for the screen.
When a patient finishes, the tablet should return to the welcome page with no trace of the previous person. Many check-in programs do this automatically after a pause or a submitted form. If yours does not, staff need a habit:
After each patient, confirm the form was submitted, then tap to start a new session.
Never leave a partly completed form open.
If a patient walks away mid-form, clear it instead of leaving their details on the screen.
Ask your software vendor or IT provider whether the tablet can be set to reset itself after a short idle time. That one setting prevents many privacy slips.
Tablets used for check-in should only be able to run the check-in program. Patients should not be able to leave it to browse, open settings or look at other apps. Many tablets support a "kiosk" or locked mode for this. Your IT provider can set it up and protect the exit with a staff-only code.
Keep the tablet's software updated, and keep a passcode on it, so a lost device is not an open door.
Before opening: charged, on the start screen, stand secure
Screen clean and dry
Check the connection to Wi-Fi and a test form if you have one
Between patients: wipe, reset, confirm the start screen
At close: wipe, charge, lock the stand, no forms left open
If a tablet freezes, restart it. If it keeps happening, note the time and what was on screen and tell your IT provider. If a tablet is lost or stolen, report it immediately so it can be locked, and follow your clinic's privacy process on what to do next.
UnityCare IT sets up check-in tablets for small clinics, including locked-down kiosk settings, passcodes and updates, and we can also look at stands and Wi-Fi coverage at the front desk. We support the tablets remotely and on site across Oklahoma, Texas and Kansas, and our help desk can walk your staff through a reset. We work under signed Business Associate Agreements where patient information is involved.
A helpdesk your staff can call or text when something stops working.
Call or text: 405-285-3845
New customers: start@unitycareit.com
Existing customers: support@unitycareit.com
Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas
Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support