A resident presses her call button, and a nurse calls 911 from a desk phone in the Maple Court building. The dispatcher sees only the campus's main street address. The ambulance arrives at the front gate and drives toward the administration building, while the patient is two buildings away.
On a campus, an address is not enough. Responders need to know which building, which floor and which wing or room to go to. Dispatchable location is the term for the information that gets them there, and your phone system has to be set up to send it.
When someone dials 911, the call carries location information to the dispatcher. For a single house, a street address is plenty. For a large property, it is not. Dispatchable location means a street address plus whatever detail is needed to find the caller, such as a building name, floor, suite or room.
Rules and expectations for this differ by state and by phone system type, and they have changed over time. Your phone provider, your state's emergency communications authority and your counsel can tell you what applies to you. This article describes the practical goal rather than any specific requirement.
Care campuses have features that confuse location data.
Several buildings may share one street address
Buildings may be connected by hallways, or may be separate with their own entrances
Wings and halls may have names rather than numbers
Phones sometimes connect through a central system at a different address
Staff move cordless phones and softphones between areas
Remote staff, or phones that use the internet, may report the wrong place
If any of these is unmapped, a call may report the main address or a stale one, and valuable minutes are lost.
Start with a floor plan of every building and a list of every phone, including desk phones, cordless handsets and any app-based phones. Then work with your phone provider to assign a location to each area.
List every building with its official name and any numbered entrances
Break each building into floors and wings
Decide the level of detail, such as a room number for resident rooms or a station name for nurse stations
Record the address format your provider and local emergency authority accept
Tie each phone, or each network port or Wi-Fi area, to a location entry
Name a person who updates the map when anything moves
Where phones are tied to the network, the location can follow the port or access point they use. That makes moves easier to track, but only if the switches and Wi-Fi are mapped too.
A location that is accurate on paper still fails if the responders cannot get in. Think about what they need on the ground.
Signs at entrances and building names visible from the drive
Door and gate access that can be opened for responders, including after hours
A staff member posted to meet and guide them, as your emergency procedures decide
Clear instructions in the call: which building, which entrance, which room
A map shared with local fire and EMS, if they will accept one
Ask your local emergency services what helps them most. Many are glad to walk the campus and learn it.
The only way to know is to test. Do not place real 911 calls to check. Instead, ask your phone provider and your local emergency communications center how testing should be done. Many have a process for scheduled, coordinated test calls, and some providers can show you the location data they would send.
After the test, check:
Did the dispatcher receive the right building and floor?
Did the result match for desk phones, cordless phones and app phones?
Did a phone in the farthest building report correctly?
Did the location update when equipment was moved?
Repeat after any change to the phone system, network, building layout or renovations. Set a regular schedule as well.
Many systems can notify a front desk or security person when someone dials 911, which helps staff meet responders. Confirm that the callback number reaches someone who can answer, even at night. A callback to a phone that rings in an empty office does not help.
UnityCare IT supports phone and network systems for care campuses, including mapping buildings, floors and wings to phones, keeping network ports and Wi-Fi areas in step with the location map, and helping you coordinate testing with your provider and local authorities. We can review your current setup and tell you where the location data is vague. We work on site across Oklahoma, Texas and Kansas.
Wi-Fi, switching, firewalls and internet that hold up across a whole facility.
Call or text: 405-285-3845
New customers: start@unitycareit.com
Existing customers: support@unitycareit.com
Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas
Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support