A box of unmanaged switches costs little, and for a while they work. Then a new camera floods the network, or a resident's smart device causes trouble, or a phone problem appears on one hall only. Nobody can see what the switch is doing, because it cannot be asked.
Switches are the part of the network that connects every wired device in the building: phones, computers, cameras, access points, printers, nurse call equipment. Choosing the right kind is a one-time decision that affects troubleshooting, safety and growth for years.
An unmanaged switch is plug and play. It passes traffic between ports and has no settings for you to change and no screen to look at. It is fine for a small, simple job, such as connecting two printers in an office or a few devices on a desk.
What it cannot do matters in a care building. It cannot separate groups of devices. It cannot prioritize phone calls. It cannot tell you which port is failing, how much traffic a device is sending or whether a cable is faulty. When something goes wrong, the only test is to unplug things and see.
A managed switch can be configured and monitored by your IT provider. That brings capabilities that matter in daily operations.
Separate networks (VLANs). Cameras, phones, resident Wi-Fi, medical devices and office computers can be kept apart, so a problem or compromise in one does not spread to the others.
Voice prioritization. Phone traffic can be given priority so calls stay clear when the network is busy.
Visibility. You can see which ports are active, which devices are connected and where errors are occurring.
Remote troubleshooting. A port can be reset or shut off without a trip to the closet.
Loop protection. If someone plugs a cable from one wall jack into another, a managed switch can limit the damage that otherwise might take down a whole wing.
Power control. On PoE models, you can see and control the power each port delivers.
Not every feature is needed everywhere. For most care buildings, these are worth having.
Support for separate networks, which is the foundation of sensible segmentation
Power over Ethernet on the ports that feed phones, cameras and access points
The ability to set priority for voice traffic
Remote management and monitoring, so your IT provider can see problems
Loop and error protection
Enough uplink speed to the rest of the network, so the closet is not a bottleneck
Features you may not need include advanced routing, complex stacking or large quantities of expensive fiber ports, unless your design calls for them. Let your IT provider explain what each feature does in your building before you pay for it.
Count what is wired today, then add room. Start with one port for each device that will connect by cable: desk phones, workstations, printers, access points, cameras, door controllers, nurse call components and any equipment in the kitchen, laundry or maintenance shop.
Then add growth. A common approach is to plan for a meaningful share of spare ports in each closet rather than filling every one on day one. Ask your IT provider how much spare capacity they suggest. Buildings tend to add cameras, access points and monitors faster than anyone predicts.
Think by closet, not only by building. Cable runs have length limits, so a long hall may need its own closet and switch. A small switch in a closet that is already crowded is hard to expand later.
Buy switches with a clear support and warranty arrangement, and ask what happens when one fails at night. Keep a spare or know how quickly a replacement arrives. Put switches on backup power if they carry phones or nurse call, and keep the closet cool and locked.
Ask for a diagram of what connects to each switch, and keep it somewhere other than the closet.
UnityCare IT designs and supports networks for care buildings, including choosing switches that fit your layout, setting up separate networks and monitoring the equipment. We can review what you have now and tell you whether managed switches are worth the change. We also provide network and Wi-Fi work on site across Oklahoma, Texas and Kansas.
Wi-Fi, switching, firewalls and internet that hold up across a whole facility.
Call or text: 405-285-3845
New customers: start@unitycareit.com
Existing customers: support@unitycareit.com
Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas
Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support