During a renovation, a technician traces a wire in the ceiling and finds a small box on the wall near the fire panel that nobody can explain. It has a phone line or an internet cable, a blinking light and a label from a company the facility stopped using three years ago. The box still works. It still talks to something outside the building.
Life-safety and building systems are built to be watched from a distance. Fire alarm companies monitor panels, elevator companies check controllers and generator vendors track run times and faults. Those connections are useful. They are also doors into your building that nobody on staff may remember opening.
Several kinds of outside link are common in care buildings:
Fire alarm monitoring, usually through a phone line, cellular communicator or internet connection, sends alarm and trouble signals to a monitoring center
Elevator monitoring sends fault information or lets technicians check the controller remotely
Generator and transfer switch monitoring reports status, fuel and test results to a service company or an online dashboard
Building controls and HVAC may allow a contractor to view and change settings from outside
Sprinkler and water flow monitors, refrigeration alarms in the kitchen and medication refrigerator alarms may report to outside services
Many of these are installed by a vendor who set up the connection, chose the passwords and may have kept the only copy of the details.
A connection that is poorly protected, or left over from a former vendor, can be misused by someone other than the vendor. Devices installed years ago may run old software, use a default password or sit on the same network as computers holding resident records. At the same time, these are systems that protect lives, so changes must be careful. The goal here is knowing what exists, not ripping it out.
Maintenance directors can build the list over a few weeks. Walk the building with this in mind:
Check the fire panel, elevator machine room, generator and transfer switch, boiler room, sprinkler riser, kitchen refrigeration and server or phone closet for communicators, modems and small network boxes.
Look at your phone and internet bills for lines that serve alarms or elevators, and ask why each exists.
Ask each vendor, in writing, to describe how they connect to your equipment, what accounts they use, who at their company has access and when they last used it.
Check your network for devices that belong to building systems, and ask your IT provider to help identify them.
Record everything on one page: the system, the vendor, the connection method, the person who approved it and the date last verified.
For every connection, ask:
Is this connection still needed, and for what exact purpose?
Is it required by a contract or inspection? Confirm with your fire and life-safety authority or insurer, since some connections are part of the way your building is monitored.
Does it share our internal network, or is it separate?
Who at your company can use it, and how do you remove a technician who leaves?
Have the default passwords been changed, and when?
What happens if it goes down, and how will we know?
A connection that looks unused might be what notifies the fire department. Never unplug a monitoring line or communicator without the vendor and the relevant authority confirming it is safe and a replacement is in place. When you make changes, schedule them with the vendor, tell the administrator and keep records of the work. Follow whatever rules your jurisdiction and your insurer have about fire watch while systems are out of service.
Where a building device needs an internet or network connection, ask your IT provider to place it on a separate network segment, away from computers that hold resident information. That way a problem in one does not affect the other. Keep the equipment in locked rooms, and note who has keys.
Put the list on the annual calendar, perhaps alongside the fire inspection. Review it, ask vendors to confirm, remove connections no longer needed through the proper channel and update any contacts. Include it in contracts: new vendors must tell you in writing how they will connect and must disclose changes.
UnityCare IT can help you identify building system devices on your network, separate them from resident data, and review how outside vendors reach them. We can work with your fire, elevator and generator vendors so changes are made safely, and we do not touch life-safety settings without them.
Security monitoring, HIPAA safeguards, backups and staff training for healthcare and small businesses.
Call or text: 405-285-3845
New customers: start@unitycareit.com
Existing customers: support@unitycareit.com
Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas
Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support