Handheld Barcode Scanners for Supply Rooms: Setup and Misreads

A central supply clerk scans a box of gauze, and the inventory screen fills with a long string of numbers in the wrong field, followed by a stray letter. She scans it again and gets something different. By the third try she is typing the item number by hand, which is exactly what the scanner was meant to prevent.

Handheld scanners are simple devices, and when they misbehave, the cause is usually one of a few things. Understanding how they work makes those problems far easier to sort out.

A scanner is usually just a fast keyboard

Most handheld scanners used in supply rooms and business offices pretend to be a keyboard. When you scan a barcode, the scanner reads the lines, turns them into characters and "types" them into whatever program is active, often followed by an Enter key press. The computer cannot tell whether a person or a scanner typed it.

This explains a lot of behavior. If the cursor is in the wrong box when you scan, the numbers land in the wrong box. If a different window is active, the scan goes there. If Caps Lock is on, some scanners will type letters in the wrong case.

How scanners connect

You are likely to meet three types.

Wired, plugged in by USB. The simplest and most reliable. It draws power from the computer and has no battery.

Wireless with a USB receiver. A small dongle plugs into the computer and pairs with the scanner. It needs a battery or a charging cradle.

Bluetooth. Pairs directly with a computer, a tablet or a phone. It can lose its pairing when switched off or moved to a different device.

Cradles matter. If a wireless scanner is not placed in its cradle between uses, the battery runs down, and scans stop working, usually on a busy afternoon.

Why it misreads or adds odd characters

If you see missing digits, extra letters or odd symbols, think about the label first and the scanner second.

A damaged or dirty label. Creases, smudges, glare from shiny packaging and faded print all cause errors. Try scanning a clean label, to see whether the scanner is fine.

Distance and angle. Hold the scanner at the distance it was designed for, and slightly angled, not flat on a glossy label.

The wrong type of barcode. Scanners can be set to read only certain types. If a code type is turned off, it may be skipped or misread.

Extra characters added after the scan. Many scanners are set to add a prefix, suffix or a tab, and your inventory or billing program may not expect them. Strange characters at the start or end of every scan point to this.

A keyboard language setting. If the computer's keyboard layout does not match the scanner's, symbols can come out wrong. For example, a dash may become another mark.

Caps Lock or a changed layout. These can change letters across a whole scan.

What to check, in order

Scan a different, clean barcode in a plain text program such as Notepad. If it reads correctly there, the scanner is working, and the problem is in the program or the field.

Check which box the cursor is in before scanning.

Look at the scanner window for dirt, smudges or scratches, and wipe gently with a soft, dry or slightly damp cloth.

Replace the battery, or put the scanner in its cradle for a while.

Unplug the receiver or cable, and plug it back in.

If the characters at the start or end are wrong, ask your IT provider or the software vendor to check the scanner's settings, since it can often be reset using a setup barcode from the manual.

Do not scan random setup codes from the internet. A wrong configuration code can change how every scan behaves.

Caring for the scanner

Keep it in a cradle or holder, not tossed in a drawer.

Do not drop it on a hard floor, and use a wrist strap if staff carry it around.

Clean the window lightly each week, and the housing as your infection-control policy requires, using a product safe for electronics.

Check the cable for kinks or damage.

Label each scanner with its station, and keep spare batteries on hand.

Report cracked windows, because dirt can get in.

Know when it is the label printer instead

If many scans fail only on items labeled in your own building, the problem may be the label printer, with faded ribbon or labels printed too small. Test with a manufacturer's label before blaming the scanner.

How we can help

UnityCare IT sets up scanners for supply rooms and business offices, including pairing, cradles and the settings that decide what gets typed after a scan. Our help desk can walk staff through these checks, and we can work with your software vendor when a scan lands in the wrong place. We support equipment on site and remotely across Oklahoma, Texas and Kansas.

Related service

A helpdesk your staff can call or text when something stops working.

Related articles

Keep reading

Contact UnityCare Technologies

Call or text: 405-285-3845

New customers: start@unitycareit.com

Existing customers: support@unitycareit.com

Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas

Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support