A family member asks where Mom is, and the screen says she is in the dining room. A staff member walks over and she is in her room, two doors from the hall. A wheelchair tagged for tracking shows up on the wrong wing. The vendor says the system works, and the building says it does not.
In many cases both are right. The tags are doing what they were designed to do, on a network that was never designed for them.
Some tags, bracelets and badges use the building's Wi-Fi to estimate where they are. The tag sends a signal, several access points hear it, and software compares how strong the signal was at each one. A stronger signal usually means closer.
That is an estimate, not a measurement. It works like trying to guess where a person stands in a dark room by how loud their voice sounds from different corners. The more listeners you have, and the better spread out, the better the guess.
Other systems use dedicated sensors, infrared or Bluetooth beacons, and these have different needs. This article is about tags that rely on the Wi-Fi itself, so confirm with your vendor which kind you are buying.
A network built for coverage tries to cover each area with as few access points as will give a good connection. That is sensible for laptops and phones. For location, it is the wrong goal.
If a tag is heard well by only one or two access points, the software has little to compare. If the access points all sit in a line down the center hall, the system can say how far along the hall someone is but struggles to say which side of the hall. If signals pass through block walls and fire doors unevenly, a tag in a room may look stronger at an access point in the next room.
The result is typically accuracy to a zone or a wing, not reliably to a room. That may be fine for finding a crash cart. It may not be enough for a wandering-resident alert at a particular door.
Different goals need different precision. Be specific before you buy:
Find equipment such as wheelchairs, lifts and IV pumps: a zone or hall is usually enough.
Know which room a resident or staff member is in: needs closer-spaced access points, with careful placement.
Alert at an exit: usually needs a purpose-built sensor at the door rather than a guess from Wi-Fi.
Staff duress or response time: confirm what precision the vendor can actually promise in your layout.
Write down the use case, the accuracy you expect, and who will act on the information. Then ask the vendor to show it in your building.
Vendors usually provide a requirements sheet. In general, expect it to call for:
More access points than a coverage design, spaced more evenly across the floor plan.
Access points placed toward corners and edges as well as central halls, so tags are heard from several directions.
A site survey and a test walk with real tags in real rooms.
A map of the building loaded into the location software, with accurate room boundaries.
Coverage in stairwells, elevators and outdoor areas if tags will travel there.
Costs rise with the number of access points and cables, so ask for a quote showing the difference between a coverage design and a location design.
Ask for a pilot on one wing. Place tags in known rooms, check what the screen says, and repeat on different shifts. Door closures, people in halls and moved furniture all change the radio picture.
Do not tie safety decisions to the system until you know how it behaves. Keep your existing procedures, such as door alarms and rounding, in place while you test.
Also ask what happens to location data. Resident movement information is sensitive. Find out who can see it, how long it is kept, and whether your policies and resident agreements cover it. Your attorney or compliance officer can confirm what applies in your state.
UnityCare IT designs Wi-Fi for care buildings and can review a location vendor's requirements against what your network provides today. We survey, add access points where the plan calls for them, and test with real tags. We also help you ask the right questions about where location data is stored and who can view it.
Wi-Fi, switching, firewalls and internet that hold up across a whole facility.
Call or text: 405-285-3845
New customers: start@unitycareit.com
Existing customers: support@unitycareit.com
Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas
Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support