The complaint arrives in pieces. A nurse says the tablet kicked her off the network around mid-afternoon. The business office laptop lost its connection for a minute during a storm warning. Nothing is wrong with the internet, the access points show as online, and the problem disappears before anyone can look at it. On the plains, where severe weather is a regular part of life, there is a chance the cause is the radar.
This article explains why, and how a good channel plan avoids it.
Wi-Fi in the 5 GHz band uses several groups of channels. Some of them are also used by weather radar and certain other radar systems. To be allowed to use those shared channels, Wi-Fi equipment must follow a rule often called DFS, short for dynamic frequency selection.
The rule is simple. Before using a shared channel, the access point listens for radar. If it hears something that looks like a radar pulse, it must stop transmitting on that channel and move to another one. The rules are set by regulators, and equipment makers have to follow them.
When an access point detects a radar-like signal, it leaves the channel. Devices connected to it lose service until they reconnect, typically after the access point picks a new channel and begins again. Some systems also wait a period before returning to the old channel.
For staff the symptoms look random:
A tablet or workstation drops and then rejoins on its own
A video call or telehealth visit freezes for a moment
A handheld device loses its session in the EHR and asks for a login
The same access point causes complaints at odd times, with nothing in the logs that you would notice
Facilities near an airport, a weather station or a military site can see this more often. A single false detection from a nearby source can also trigger it, so the pattern is not always tied to a storm.
Ask your network provider to look at the event logs on the access points or the wireless controller. Most systems record radar detections and channel changes with a time stamp. Compare those times with the complaints.
You can help by keeping a simple note:
Write down the time, the room and the device when someone has a drop
Note whether the problem was brief and recovered by itself
Note whether several people in the same area were affected at the same moment
Send the log to your provider rather than relying on memory
Matching time stamps are strong evidence. If the logs show nothing, something else is going on, such as interference, a failing access point or a cabling issue.
The fix is not to turn off the 5 GHz band. It is to plan around the shared channels.
Use the channels in the 5 GHz band that are not subject to radar detection wherever there are enough of them for your building
Reserve the shared channels for access points that are far from the busiest areas, or leave them out entirely if the logs show repeated detections
Use narrower channel widths so there are more distinct channels to assign, which reduces overlap between neighbors
Turn on automatic channel selection only after confirming which channels it is allowed to pick from
Keep critical areas, such as the nurse station and medication rooms, on stable channels, and test in a real walk-through
A well-planned building has enough non-radar channels to cover the clinical areas, which is the point of a professional survey. A building with too many access points on too few channels may be pushed onto shared ones, and then the choice becomes a design problem rather than a setting.
Ask whether any of your access points are using shared radar channels, and whether the logs show detections. Ask whether the 2.4 GHz and 6 GHz options (if your equipment supports them) are being used sensibly. Ask for the planned channel map, so that you can see it and keep it with your network documents.
Do not ask for a change during a busy shift. Channel changes cause a short disconnect themselves, so schedule them for a quiet time and tell the charge nurses first.
UnityCare IT designs and supports Wi-Fi for facilities across Oklahoma, Texas and Kansas, and we know what weather and radar do to a channel plan. We can review your access point logs for radar events, adjust channel assignments and verify the result with a walk-through. Where the building needs more access points to avoid shared channels, we will say so plainly.
Wi-Fi, switching, firewalls and internet that hold up across a whole facility.
Call or text: 405-285-3845
New customers: start@unitycareit.com
Existing customers: support@unitycareit.com
Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas
Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support