On a hot July afternoon, the Wi-Fi drops across the building, the EHR will not load, and the phones go quiet. The IT closet door is shut. Inside, the temperature is hot enough that the server and the switches have shut themselves down to protect themselves. The air handler that used to cool that room was turned off during a remodel and nobody remembered.
Heat is one of the quieter causes of outages. It tends to build slowly, and by the time anyone notices, equipment has already stopped.
Servers, switches and battery backups produce heat, and they rely on moving air to carry it away. When room temperature climbs, fans run faster, then components get hotter, and eventually built-in protection shuts the device down or slows it. Repeated overheating can shorten the life of equipment and may damage drives, which is a problem if a drive holds your records.
Battery backups are also sensitive to heat, which can shorten their working life.
Small closets are the usual trouble spot. A room that is fine in spring can fail in August because it has no dedicated cooling, shares a wall with a hot attic or kitchen, or depends on a building system that is shut off overnight or on weekends.
Maintenance directors and administrators can do this walk-through without being technical:
Is there dedicated cooling? Ask whether the room is cooled on its own or relies on air leaking in from the hallway.
Does cooling run around the clock? Some systems cycle down at night or on weekends or are on a schedule meant for offices.
Is the room used for storage? Boxes stacked against equipment block vents and trap heat.
Is the door closed with no air movement? An enclosed space with no exhaust will heat up.
Are fan vents and filters dusty? Dust restricts airflow.
Are racks and cabinets crowded? Equipment packed tight with no gaps runs hotter.
Does the sun hit that wall, or does an attic sit above? Look for the hot spots in the building.
Is it hot to the touch or noticeably warm to walk into? If you feel it, the equipment feels it more.
Ask your IT provider what temperature range the equipment is designed for. The manufacturers publish it, and we recommend following them rather than a rule of thumb.
Clear boxes and clutter away from equipment and vents.
Keep the door ajar or add a vent or fan if the room is otherwise sealed and cooling is not available, as a stopgap.
Ask maintenance to verify that cooling serves the room all day and night, all year.
Replace or clean filters on schedule.
Put equipment on racks with space between devices.
Consider a small dedicated cooling unit for the closet, sized by your HVAC contractor.
Make a note on the maintenance calendar before summer, and again if an HVAC system is replaced or reprogrammed.
The best protection is knowing about heat before it causes damage. A small temperature sensor in the closet can send an email or text when the room passes a threshold you choose, including at night and on weekends. Many network devices and battery backups can also report their own internal temperature to a monitoring system.
Decide in advance who receives the alert and what they do. A text to a maintenance director who is off duty is only useful if there is a plan: check the cooling, open the door, call the HVAC contractor, and call IT if equipment is shutting down.
If equipment has shut down from heat, cool the room first. Do not power everything on at once. Let your IT provider restart equipment in order, and check that the EHR and backups are healthy before relying on them. Document what happened and the temperature if you know it, for your records and your insurer.
A hot closet is a facility problem as much as an IT problem, so make it a shared one. Note cooling in your maintenance routines and in your emergency plan, since a power outage that shuts the air conditioner while the generator carries only part of the building can cause a heat problem even with power.
UnityCare IT can place temperature and water sensors in your equipment closets with alerts that reach the right people, review how your gear is racked and ventilated, and work with your maintenance director and HVAC contractor on a fix. Our after-hours help desk can help restart systems safely if heat has taken something down.
Security monitoring, HIPAA safeguards, backups and staff training for healthcare and small businesses.
Call or text: 405-285-3845
New customers: start@unitycareit.com
Existing customers: support@unitycareit.com
Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas
Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support