The therapy wing sits across a parking lot from the main building, and the administrator wants it on the same network as the nurses' station. The contractor's quote for trenching conduit under the asphalt arrives, and it is far larger than anyone expected. Somebody asks whether the two buildings can simply talk to each other through the air.
They can. A point-to-point wireless bridge is a pair of directional radios, one on each building, aimed squarely at each other. They behave like a long network cable you cannot see. Done well, a bridge is a sound permanent link. Done casually, it becomes the thing that drops out every time it rains.
A bridge is worth a look when the buildings are separated by a road, a parking lot, a drainage easement or land you do not own. It also suits a leased building where the landlord will not permit digging, and it can serve as a quick link while a buried line is being planned.
Trenching and fiber is still the stronger long-term answer when the distance is short, the ground is easy to open and the building is yours. Fiber is not affected by weather or by a tree that grows another foot each year. A bridge is the practical choice when the trench would cost more than the link is worth, or when the ground simply cannot be disturbed.
The two radios must have a clear path between them. Standing on one roof and spotting the other building is a good first test, but it is not enough. Radio signals spread out in a football-shaped zone around the straight line between the antennas, and that zone should stay mostly free of obstructions. A tree line, a water tower, a neighboring roof or a tall delivery truck parked in the wrong place can all clip it.
Radios are usually mounted high enough that the path clears everything with room to spare. Distance matters too. Short hops are forgiving. Long hops need more careful aiming, taller mounts and a proper planning tool before anyone climbs a ladder.
Most bridge problems trace back to mounting rather than electronics. A radio on a flimsy bracket will drift when the wind blows, and a narrow beam that drifts a little can lose the other end entirely.
Plan for these:
A rigid pole or mast fixed to the building structure, not just clipped to a parapet or vent pipe.
Roof penetrations handled by a roofer, so your roof warranty stays intact.
Grounding and surge protection on the cable, since an exposed rooftop radio is a lightning target.
Outdoor-rated network cable run back to a switch inside, with a drip loop so water does not follow the cable into the building.
A clear route to the inside equipment, because the radio is usually powered through the same cable.
Ask whoever is installing this who will be on the roof, who is responsible for the roof afterward and who owns the mount once it is up.
Rain, snow and fog affect some radio bands more than others, and heavy storms can reduce link quality. A well-designed link is built with extra margin so it keeps working through ordinary Oklahoma and Texas weather. Ask the installer how much margin the design has, and whether the radios will adapt their speed instead of dropping out entirely.
Trees are the quieter problem. A link that is perfect in winter can fail in June when leaves come in, and a young tree can grow into the path over a few years. Survey the route in the growing season if you can, or assume foliage will be there. Ask who is allowed to trim and who will notice when it needs doing.
Another consideration is the crowded unlicensed airwaves. Many bridges share frequency bands with other equipment, and a neighboring business could add a competing link. A site survey that checks the surrounding radio activity before you buy is inexpensive and worth requesting.
What speed does the link provide, and does that leave room for cameras, phones and the EHR traffic crossing it?
What happens to the far building if the link goes down, and can critical systems keep working?
Is there a backup path, such as a second link or a cellular failover?
Who monitors the radios and will tell you when signal quality slips?
Who handles the roof, the permits and any needed landlord or city approvals?
A therapy wing that loses its phones and charting for an afternoon is a real operational problem, so think about failure before you think about speed.
UnityCare IT designs and supports network and Wi-Fi links between buildings across Oklahoma, Texas and Kansas. We can walk the route with you, tell you honestly whether a bridge or a buried line fits better, and monitor the link after it is installed. When trenching is the better answer, we will say so and help you coordinate the contractor.
Wi-Fi, switching, firewalls and internet that hold up across a whole facility.
Call or text: 405-285-3845
New customers: start@unitycareit.com
Existing customers: support@unitycareit.com
Service area: based in Edmond, Oklahoma, serving Oklahoma, Texas and Kansas
Hours: Mon–Fri 8 AM–5 PM CT; 24/7 after-hours support